Budgetary APF board rates in Delhi can range from about ₹60 to more than ₹500 per sq ft because thickness, density, finish, fire treatment and fabrication change the product being quoted. By checking the selling unit, calculating the required area and sending a complete specification, you can compare supplier offers and obtain a realistic delivered cost and dispatch date.
Key takeaways
- Budget ₹60–₹130 per sq ft for 9–12 mm APF/PET board.
- Allow ₹140–₹280 per sq ft for 25 mm board.
- Confirm density, facing, finish, quantity and fabrication before comparing quotes.
- Request performance documents and a written stock confirmation before ordering.
What APF board costs in Delhi and what the quote includes
Budget ₹60–₹130 per sq ft for 9–12 mm APF/PET acoustic board, ₹140–₹280 for 25 mm, and ₹260–₹500 or more for 50 mm. These are material-only budget ranges, not fixed tariffs. The apf board price in delhi changes with density, colour, facing, order quantity, finish and fabrication.
| Thickness | Indicative material rate | Common quote basis |
|---|---|---|
| 9–12 mm | ₹60–₹130 per sq ft | Sheet or sq ft |
| 25 mm | ₹140–₹280 per sq ft | Sq ft or sq m |
| 50 mm | ₹260–₹500+ per sq ft | Sq ft, sheet or custom panel |
Ask whether the rate is per sq ft, sq m, sheet, cubic metre or pack before comparing offers. One square metre equals 10.764 sq ft. A nominal 2440 × 1220 mm sheet covers about 32 sq ft before cutting waste, but supplier dimensions and pack quantities vary.
The delivered APF board insulation cost can rise through freight to Delhi/NCR, GST, special packing, cutting, grooving, CNC patterns, edge treatment, adhesive, clips, sub-framing and installation. Colour-matched or printed panels can be made to order rather than taken from local stock.
Request a written breakup showing board area, wastage, transport, GST, dispatch date and installation scope. A lower sheet rate can produce a higher installed total than a thicker, pre-fabricated panel.
Which APF board specification and stock details must you confirm
“APF board” does not identify one standard product. An APF acoustic panel supplier in Delhi may quote polyester-fibre panels with different density, thickness, facing, colour and fire treatment. Compare the specification line by line before comparing rates.
| Specification | Same product only if both quotes state | Red flag |
|---|---|---|
| Thickness | 9, 12, 25 or 50 mm, with tolerance | “Standard thickness” |
| Density | Exact kg/m³ value | Density omitted |
| Sheet size | Length × width in millimetres | Price per sheet without dimensions |
| Surface | Raw, coloured, faced, grooved or printed | “Finished panel” without finish details |
| Fire treatment | Untreated or named tested construction and classification | “Fire retardant” without test evidence |
| Quantity basis | Price per sheet, square metre or square foot | Unit differs between quotes |
Ask each supplier to confirm these details in writing:
- Exact sheet dimensions, thickness, density, weight per sheet and pack quantity
- Colour code, edge profile, cutting or CNC pattern, and whether adhesive or clips are included
- Physical stock count, warehouse location, batch or lot number, and quantity already reserved
- Whether the quoted quantity is ready for dispatch or must be manufactured
- Firm dispatch date and delivery date to your site
Calculate usable stock from actual sheet dimensions, not a catalogue assumption. A 2440 × 1220 mm sheet covers about 32 sq ft before cutting waste, but supplier dimensions vary. If the colour, printed finish or high-density grade is made to order, obtain a production lead time instead of accepting “available.”
How to compare quotations and calculate the number of boards
Do not compare a per-sheet quote with a per-square-foot quote. Confirm the same thickness, density, sheet size, finish, edge treatment and quantity, then convert every offer to a delivered rate per square metre. The APF board insulation cost also needs freight to Delhi/NCR, GST, cutting, packing, adhesive, clips, sub-framing and installation added separately.
| Quote basis | Conversion | Comparable rate |
|---|---|---|
| Per sheet | Divide price by the sheet’s actual area in square metres | Price per m² |
| Per sq ft | Multiply by 10.764 | Price per m² |
| Per sq m | Use the quoted figure directly | Price per m² |
| Per cubic metre | Multiply by board thickness in metres | Price per m² |
| Installed total | Add all listed extras, then divide by covered area | Delivered or installed rate per m² |
- Record the usable sheet area. A 2440 × 1220 mm sheet covers 2.98 m², or about 32 sq ft, before cutting; use the supplier’s actual dimensions.
- For a rectangular wall, multiply length by height. For a room, multiply the perimeter by wall height, then add the ceiling area if required.
- Subtract doors, windows and other openings only when their dimensions are measured accurately. Leaving them in overstates the quantity.
- Divide the net area by usable sheet area, then add 5% for simple straight cuts or 10% for patterns, columns and multiple openings.
- Round up to whole sheets and check the result against pack quantities. A low APF board price in Delhi can become expensive when wastage, delivery and installation are excluded.
Where APF board works and which performance documents to request
Use APF board where sound absorption is the goal: offices, classrooms, conference rooms, auditoriums, restaurants, studios, corridors, suspended ceilings and partition faces. It can also line equipment-room walls or acoustic enclosures when the panel has suitable protection and stays clear of hot surfaces.
It is not a substitute for roof, wall or HVAC insulation; a thin exposed PET panel will not deliver the thermal resistance of mineral wool, EPS, XPS or PU systems.
Two suppliers using “APF” may quote different thicknesses, densities, facings and fire treatments. Ask an APF acoustic panel supplier in Delhi for evidence covering the exact construction you will receive.
| Document | Check | Why it matters |
|---|---|---|
| Acoustic test report | NRC or absorption coefficients, test frequencies, thickness, air gap and mounting under ASTM C423 or ISO 354 | A catalogue NRC does not apply to every installation |
| Thermal test or declaration | Thermal conductivity or resistance, test thickness and method such as ASTM C518 or EN 12667 | Confirms limited thermal performance without overstating it |
| Fire test report | ASTM E84 flame-spread and smoke-developed results, or EN 13501-1 classification | “Fire retardant” alone is not a classification |
Request the panel sample, technical data sheet, batch or product identification, and the complete fire report. Check that the report names the same thickness, density, facing and adhesive system; an altered facing can invalidate the result. Avoid untreated panels beside heaters, ducts or ignition sources because PET fibre can soften, melt or shrink.
How to buy APF board in Delhi with a complete RFQ
Send one written RFQ, not “APF board required,” if you want a firm Delhi quote. State the application, required delivery date and exact unloading address, including floor, lift access and vehicle restrictions.
1. Specify thickness, density or mass per unit area, sheet dimensions, colour, edge profile, and any perforation, groove, printed finish or CNC pattern. State the required NRC test condition and fire classification, and attach the project specification if one exists.
2. Give the quantity in both sheets and square feet. Confirm the supplier’s sheet area before calculating: a nominal 2440 × 1220 mm sheet covers about 32 square feet, but dimensions vary. Ask for the quoted unit—per sheet, square foot or square metre—and whether cutting waste is included.
3. Request separate figures for board, cutting, packing, freight, GST, adhesive, clips, sub-framing and installation. Ask for the physically available quantity, batch or colour availability, written dispatch date, delivery date and replacement terms for damaged or incorrect sheets.
Standard-colour sheets may leave local stock; custom colours, graphics, grooves, CNC patterns and high-density panels are often made to order.
Ask an APF board dealer near Delhi to label each line “in stock” or “made to order.” Shiv Sales Corporation can receive the same RFQ, allowing you to compare availability and delivered cost rather than material rates alone.
Related product
 | APF Board – Advanced Acoustic & Thermal Insulation Panel APF Board – Advanced Acoustic & Thermal Insulation Panel APF Board from Shiv Sales Corporation is a premium-grade insulation panel engineered for superior acoustic and thermal performance. View product → |
Frequently asked questions
What is the APF board price in Delhi?
Budget ₹60–₹130 per sq ft for 9–12 mm APF/PET acoustic board, ₹140–₹280 for 25 mm, and ₹260–₹500 or more for 50 mm. These are material-only budget ranges; the final apf board price in delhi depends on density, colour, facing, quantity, finish and fabrication.
What should you confirm before buying APF board in Delhi?
Confirm thickness, density, board dimensions, colour, facing, edge finish, fabrication requirements, available stock, delivery location, GST, freight and the quote validity period.
How do you compare APF board quotations?
Convert every quote to a common price per sq ft, separate material, fabrication, freight and tax, then compare the usable coverage after cutting waste and the confirmed delivery date.
Where can APF board be used?
APF board is used for acoustic treatment on walls, ceilings, partitions, studios, offices, meeting rooms, auditoriums and industrial spaces. Select the thickness, finish and fixing method for the room’s acoustic and fire-performance requirements.
Keywords
